KM International
Asphalt Recycling
KM T2 Asphalt Recycler
The KM International Asphalt Recycler will produce a quality batch (2,600 lbs. every 20 minutes) of asphalt from recycled pulverized asphalt, millings, or sawcut materials to produce a patching material that will exceed Department of Transportation asphalt specifications and standards.
Recycle asphalt millings or chunks
Currently the cost of cold patch asphalt material, even after being put to bid, can run $110.00 per ton, or higher. The cost of hot mix asphalt, if available, is around $75.00 to $80.00 per ton with prices expected to continually go up in the coming years.
The KM T2 Asphalt Recycler will produce:
- (2.5) tons per hour using either broken, chunk, or milled asphalt
- Asphalt at $15.00 to $20.00 per ton.
- Using reclaimed asphalt and used asphalt shingles is not just "Green" but also SMART
- The savings to your budget is immediate!
- Perfectly Customize your asphalt blend by adding more or less asphalt shingles to every load
KM T2 Asphalt Recycler Specifications
| Trailer Specs | |
| Length: | 23' - 10" |
| Width: | 8' - 0" |
| Height: | 7' - 6" |
| Weight (net): | 6900 lbs |
| Top opening: | 26" x 94" |
| Construction: | 3/16" steel brinell hardened |
| Actuators: | (2) hydraulic cylinders, 2" x 16" |
| Asphalt Heating Drum | |
| Construction: | 3/16" steel, 450 brinell hardened |
| Agitators: | Seven (7), 3/16" steel, 450 brinell hardened |
| Rotation: | Hydraulic, reversible, approximately 8 rpm, fixed |
| Hydraulics | |
| Reservoir (capacity): | 22 gallon |
| Pump (outpour): | 9.5 gallon/minute |
| Motor (capacity): | 38 cubic inch |
| Cylinders (Bore & Stroke): | Lift: 5" x 15"; load: (2) 2" x 16" |
| Other components: | Control valves, pressure gauges, filters, piping and hoses |
| Heating System | |
| Fuel: | No. 1 or N. 2 diesel, B-5 bio-diesel, or kerosene |
| Fuel Storage: | 60 gallon with filter and manual shut-off |
| Burner Type: | Beckett Model SDC |
| Burner Capacity: | 700,000 BTU |
| Other components: | Piping, hoses, gage and swivel arm |
| Loading / Unloading | |
| Loading: | Mechanically, broken chunk pieces (up to 12") or milled asphalt (RAP) |
| Unloading: | Self-unloading on to repair site, or into loader bucket |
Recycling time will vary depending on moisture content, ambient temperature, asphalt quality or type (such as millings, broken pieces, etc.)